TransPocket 180

Category:

The new generation of TransPocket 150/180 devices brings a high degree of flexibility. The integrated PFC (Power Factor Correction) technology supports the use of extremely long mains leads up to more than 100 m in length. The operating concept has also become even more intuitive. A 7-segment display makes it possible to quickly read off the parameters that have been configured. In addition, the display is slightly set back and therefore well protected against damage. The easily comprehensible setup is a tremendous help in simplifying operation.

Share with your friends:

Technical Data

Welding current / Duty cycle [10min/40°C] 180A / 40%
Welding current / Duty cycle [10min/40°C] 160A / 60%
Welding current / Duty cycle [10min/40°C] 120A / 100%
Operating voltage 20,4V – 27,2V
Open-circuit voltage 101,0 V
Mains frequency 50-60Hz
Mains voltage 230V
Mains fuse 16A
Dimension / b 160,0 mm
Dimension / l 435,0 mm
Weight 8,8 kg
Degree of protection IP23

Features

  • SOFTSTART
    The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
  • ANTI-STICK
    If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.
  • HOTSTART
    To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.