TransTig 170

When developing the TransTig 170/210, our focus was entirely on the benefit for our customers. What is needed is absolutely clear: a perfect, stable arc. The higher operating frequency of the inverter technology makes this stability possible – due to precise control. Other benefits of this optimized process technology are maximum efficiency in the duty cycle, the output power and the mains voltage supply. Last but not least, this increased efficiency also makes welding more enjoyable!

 

Share with your friends:

Technical Data

Welding current / Duty cycle [10min/40°C] 170A / 40%
Welding current / Duty cycle [10min/40°C] 155A / 60%
Welding current / Duty cycle [10min/40°C] 140A / 100%
Operating voltage 10,1V – 16,8V
Open-circuit voltage 35 V
Mains frequency 50-60Hz
Mains voltage 230V
Mains fuse 16A
Dimension / b 160 mm
Dimension / l 435 mm
Weight 9,7 kg
Degree of protection IP23

Features

EFFICIENT TIG WELDING

WITH RESONANT INVERTER TECHNOLOGY

40% DUTY CYCLE

Weld for four minutes without a break at 170 or 210 amperes. On average, weld for one minute longer than the competition.

30% MAINS VOLTAGE TOLERANCE AT MAXIMUM OUTPUT POWER

The inverter technology can compensate for voltage fluctuations or an input voltage that is too low, so that the maximum output power is always supplied. A huge advantage, especially in poorly protected grids!

96 V – 265 V MAINS VOLTAGE SUPPLY

The high bandwidth of the power supply makes the TransTig 170/210 compatible with almost any grid – from every part of the world. A real multivoltage device!

Great features available as below

  • TAC
    With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
  • HF IGNITION
    The touchless and gentle high-frequency ignition is the easiest option for igniting the arc.
  • TOUCHDOWN IGNITION
    Touchdown ignition can be used in particular for sensitive application areas. This allows electromagnetic interference, which can occur during HF ignition, to be avoided.

 

Product

THE TRANSTIG 170/210

The digital resonant intelligence reacts optimally to voltage fluctuations, thus ensuring an absolutely stable arc.

FILTER AS STANDARD

The vast majority of our devices come with a reusable dust/dirt filter fitted that ensures the power components inside the devices remain free of dirt.

FPP – FRONIUS POWER PLUG

With the help of a watertight, lockable connector on the back of the power source, the mains cable or mains plug can be changed quickly and easily depending on the place of use.

ROBUST PLASTIC HOUSING AND FUNCTION CARRIER

The function carrier is the central element in the design of the power source. It keeps all the components in place. Like the housing, it is made of durable plastic and tested for mechanical loads that far exceed the standard. The carrier provides for the ultimate in durability, while at the same time maintaining a low weight.

TMC – TIG MULTI CONNECTOR

The universal connection for system components, such as welding torches with special functions (Up/Down, potentiometers) or remote controls, gives the user cross-product advantages.